0340 Protector Cube
Sensitive equipment needs protection, and since 1976 the answer has been the Peli™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Peli™ cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
- Built-in, spring loaded pull handle
- Large 2-person fold down handles
- Stainless steel caster wheels included
- Watertight, crushproof, and dustproof
- 3 level Pick N Pluck™ with convoluted lid foam
- Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
- Easy open Double Throw latches
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Stainless steel hardware and padlock protectors
- Peli’s legendary lifetime guarantee**
- * Where applicable by law
0340 Protector Cube |
|
| INTERIOR (L X W X D) | 18.00″ x 18.00″ x 18.00″ (45.7 x 45.7 x 45.7 cm) |
| EXTERIOR (L X W X D) | 20.50″ x 20.50″ x 19.25″ (52.1 x 52.1 x 48.9 cm) |
| LID DEPTH | 4.50″ (11.4 cm) |
| BOTTOM DEPTH | 13.50″ (34.3 cm) |
| TOTAL DEPTH | 18″ (45.7 cm) |
| INT VOLUME: | 3.38 ft³ (0.096 m³) |
| WEIGHT WITH FOAM | 29.76 lbs (13.5 kg) |
| WEIGHT EMPTY | 24.00 lbs (10.9 kg) |
| BUOYANCY | 220.46 lbs (100 kg) |
| FOAM LAYERS | Layer 1 (Lid): 2.5 cm – Pad Layer 2 (Lid): 7.6 cm – Convolute Layer 3 (Base): 2.5 cm – Pad Layer 4 (Base): 2.5 cm – Pad Layer 5 (Base): 9.8 cm – Pick N Pluck Layer 6 (Base): 9.8 cm – Pick N Pluck Layer 7 (Base): 9.8 cm – Pick N Pluck |
| BODY | Polypropylene |
| LATCH | ABS |
| O-RING | Polymer |
| PINS | Stainless Steel |
| FOAM | 1.3 lb Polyurethane |
| PURGE BOD | ABS |
| PURGE VENT | 3 Micron Hydrophobic Non-Woven |
- Overview
-
0340 Protector Cube
Sensitive equipment needs protection, and since 1976 the answer has been the Peli™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Peli™ cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
- Built-in, spring loaded pull handle
- Large 2-person fold down handles
- Stainless steel caster wheels included
- Watertight, crushproof, and dustproof
- 3 level Pick N Pluck™ with convoluted lid foam
- Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
- Easy open Double Throw latches
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Stainless steel hardware and padlock protectors
- Peli’s legendary lifetime guarantee**
- * Where applicable by law
- Technical Specifications
-
0340 Protector Cube
INTERIOR (L X W X D) 18.00″ x 18.00″ x 18.00″ (45.7 x 45.7 x 45.7 cm) EXTERIOR (L X W X D) 20.50″ x 20.50″ x 19.25″ (52.1 x 52.1 x 48.9 cm) LID DEPTH 4.50″ (11.4 cm) BOTTOM DEPTH 13.50″ (34.3 cm) TOTAL DEPTH 18″ (45.7 cm) INT VOLUME: 3.38 ft³ (0.096 m³) WEIGHT WITH FOAM 29.76 lbs (13.5 kg) WEIGHT EMPTY 24.00 lbs (10.9 kg) BUOYANCY 220.46 lbs (100 kg) FOAM LAYERS Layer 1 (Lid): 2.5 cm – Pad
Layer 2 (Lid): 7.6 cm – Convolute
Layer 3 (Base): 2.5 cm – Pad
Layer 4 (Base): 2.5 cm – Pad
Layer 5 (Base): 9.8 cm – Pick N Pluck
Layer 6 (Base): 9.8 cm – Pick N Pluck
Layer 7 (Base): 9.8 cm – Pick N PluckBODY Polypropylene LATCH ABS O-RING Polymer PINS Stainless Steel FOAM 1.3 lb Polyurethane PURGE BOD ABS PURGE VENT 3 Micron Hydrophobic Non-Woven - Downloads
