LogTag® LTI-HID
Desktop USB Interface Cradle
The new LTI-HID desktop USB interface cradle replaces the current LTI/USB interface.The LTI-HID uses interface drivers that are built into all currently supported Windows OS versions, so there is no longer any need to install proprietary drivers.
The LTI-HID is compatible with all standard LogTag® recording products having 3 silver contact pins in the lower rear case. The LTI-HID uses the proven and reliable spring contact arrangement taken from the LTI/USB. The LTI-HID incorporates a micro USB socket for connection to a computer.
Two indicators at the top (red & green), identify what actions the interface is currently performing:
- When a Logger is inserted, the green indicator turns off, the red indicator turns on and remains on while Logger and software exchange information, (E.g. during data download or configuring the Logger). When the data exchange is complete, the green indicator flashes to show that the recorder can now be removed, or further data exchange can be initiated (E.g. starting the configuration process after an automatic download).
- When the Logger is removed, the green indicator turns on again and signals that the interface is ready to receive the next Logger
LTI-HID |
|
| Operating Temperature Range | -20°C to +60°C |
| Storage Temperature Range | -40°C to +70°C |
| USB Standard | 2.0 |
| Environmental | IP50 (Rated for inside use only) |
| Software Capability | LTA 2.9r2, LTA 3.0r8, LTX 1.1r1, LogTag Online |
| Power Source | Powered from computer |
| Size | 45mm(h) x 85mm(W) x 71mm(D,) excluding cable |
| Weight | 74g, excluding cable |
| Case Material | Polycarbonate, ABS |
| Accessories | 1.0m USB Cable |
| Compliance and Certifications |
- Overview
-
LogTag® LTI-HID
Desktop USB Interface Cradle
The new LTI-HID desktop USB interface cradle replaces the current LTI/USB interface.The LTI-HID uses interface drivers that are built into all currently supported Windows OS versions, so there is no longer any need to install proprietary drivers.
The LTI-HID is compatible with all standard LogTag® recording products having 3 silver contact pins in the lower rear case. The LTI-HID uses the proven and reliable spring contact arrangement taken from the LTI/USB. The LTI-HID incorporates a micro USB socket for connection to a computer.
Two indicators at the top (red & green), identify what actions the interface is currently performing:
- When a Logger is inserted, the green indicator turns off, the red indicator turns on and remains on while Logger and software exchange information, (E.g. during data download or configuring the Logger). When the data exchange is complete, the green indicator flashes to show that the recorder can now be removed, or further data exchange can be initiated (E.g. starting the configuration process after an automatic download).
- When the Logger is removed, the green indicator turns on again and signals that the interface is ready to receive the next Logger
- Technical specification
-
LTI-HID
Operating Temperature Range -20°C to +60°C Storage Temperature Range -40°C to +70°C USB Standard 2.0 Environmental IP50 (Rated for inside use only) Software Capability LTA 2.9r2, LTA 3.0r8, LTX 1.1r1, LogTag Online Power Source Powered from computer Size 45mm(h) x 85mm(W) x 71mm(D,) excluding cable Weight 74g, excluding cable Case Material Polycarbonate, ABS Accessories 1.0m USB Cable Compliance and Certifications - Download
LTI-WiFi Interface Cradle
The wireless interface LTI-WiFi is a high-speed 802.11/b/g/n compatible device that connects to your WiFi network and uploads data to an external cloud server.
- Use LTI-WiFi to download data without access to a computer and installed software.
- Accepts any standard LogTag® data logger with 3 silver contact pins on rear case.
- Easily set up to work with your WiFi network.
- Downloaded data is fully encrypted and automatically uploaded to a secure server.
- The LTI-WiFi connects to LogTag Online, LogTag’s cloud server solution for viewing, analyzing and storing data.
- Uploaded data is immediately available for viewing online.
- If the WiFi network is temporarily unavailable, downloaded data is stored in the LTI-WiFi’s buffer memory.
- Attaching the LTI-WiFi to a power bank creates a portable data access point that will work anywhere with WiFi coverage.
- Robust and reliable contacts are good for thousands of insertions.
- Inbuilt LED indicators show data download and network access status.
- The LTI-WiFi can be connected to a computer and used as a conventional (LTI-HID) interface.
| Product Model | LTI-WiFi |
| Operating Temperature Range | 0°C to +40°C |
| Storage Temperature Range | -40°C to +70°C |
| USB Standard | 2.0 |
| Logger Buffer | Up to 48 Logger downloads can be buffered |
| Wireless Standard | 2.4GHz 802.11 b/g/n. High sensitivity internal antenna. |
| Network Security | WPA/WPA2-PSK |
| Environmental | IP50 (Rated for inside use only) |
| Software Capability | LTA 2.9r2, LTA 3.0r8, LTX 1.1r1, LogTag Online |
| Indicators | Green ‘Activity’ LED. Red ‘Busy/Error’ LED. Blue/Red dual colour ‘Network Activity’ LED |
| Power Source | 5V/5W (Computer, power bank or USB wall charger) |
| Size | 45mm(H) x 85mm(W) x 71mm(D), excluding cable |
| Weight | 74g, excluding cable |
| Case Material | Polycarbonate, ABS |
| Connection | USB Micro |
| Range (Clear line of sight) | 40m |
| Accessories | 2.0m USB Cable |
| Compliance and Certifications |
- Overview
-
LTI-WiFi Interface Cradle
The wireless interface LTI-WiFi is a high-speed 802.11/b/g/n compatible device that connects to your WiFi network and uploads data to an external cloud server.
- Use LTI-WiFi to download data without access to a computer and installed software.
- Accepts any standard LogTag® data logger with 3 silver contact pins on rear case.
- Easily set up to work with your WiFi network.
- Downloaded data is fully encrypted and automatically uploaded to a secure server.
- The LTI-WiFi connects to LogTag Online, LogTag’s cloud server solution for viewing, analyzing and storing data.
- Uploaded data is immediately available for viewing online.
- If the WiFi network is temporarily unavailable, downloaded data is stored in the LTI-WiFi’s buffer memory.
- Attaching the LTI-WiFi to a power bank creates a portable data access point that will work anywhere with WiFi coverage.
- Robust and reliable contacts are good for thousands of insertions.
- Inbuilt LED indicators show data download and network access status.
- The LTI-WiFi can be connected to a computer and used as a conventional (LTI-HID) interface.
- Technical specification
-
Product Model LTI-WiFi Operating Temperature Range 0°C to +40°C Storage Temperature Range -40°C to +70°C USB Standard 2.0 Logger Buffer Up to 48 Logger downloads can be buffered Wireless Standard 2.4GHz 802.11 b/g/n. High sensitivity internal antenna. Network Security WPA/WPA2-PSK Environmental IP50 (Rated for inside use only) Software Capability LTA 2.9r2, LTA 3.0r8, LTX 1.1r1, LogTag Online Indicators Green ‘Activity’ LED. Red ‘Busy/Error’ LED. Blue/Red dual colour ‘Network Activity’ LED Power Source 5V/5W (Computer, power bank or USB wall charger) Size 45mm(H) x 85mm(W) x 71mm(D), excluding cable Weight 74g, excluding cable Case Material Polycarbonate, ABS Connection USB Micro Range (Clear line of sight) 40m Accessories 2.0m USB Cable Compliance and Certifications - Download
LogTag WiFi Interface Cradle
Use LTI-WM-WiFi to upload data in real time without access to a computer and installed software. Downloaded data is fully encrypted and automatically uploaded to a secure server.
Easily set up to work with your WiFi network.
Accepts any TREX/TREL/TRED data loggers.
- Use LTI-WM-WiFi to upload data in real time without access to a computer and installed software.
- Accepts TREX/TREL/TRED data loggers.
- Easily set up to work with your WiFi network
- Downloaded data is fully encrypted and automatically uploaded to a secure server.
- Uploaded data is immediately available to authorized stakeholders.
- If the WiFi network is temporarily unavailable, downloaded data is stored in the LTI-WM- WiFi’s buffer memory.
- Robust and reliable contacts are good for thousands of insertions.
- Inbuilt indicators show data download and network access status.
| Product Model | LTI-WM-WiFi |
| Operating Temperature Range | -25°C to +40°C |
| Storage Temperature Range | -40°C to +70°C |
| USB Standard | 2.0 |
| Logger Buffer | Up to 45 logger downloads can be buffered |
| WiFi | IEEE 802.11 b/g/n (2.4Ghz) WPA/WPA2 security |
| Network Security | WPA/WPA2-PSK |
| Environmental | IP50 (Rated for inside use only) |
| Power Source | 5V (computer or USB wall charger) |
| Size | 70mm(H) x 114mm(W) x 38mm(D) |
| Weight | 100g |
| Case Material | ABS |
| Connection | USB Micro |
| Range (Clear line of sight) | 40m |
| Standard Accessories | 2.0m USB Cable, USB Wall Charger (US, other models available upon request) |
| Compliance and Certifications |
- Overview
-
LogTag WiFi Interface Cradle
Use LTI-WM-WiFi to upload data in real time without access to a computer and installed software. Downloaded data is fully encrypted and automatically uploaded to a secure server.
Easily set up to work with your WiFi network.
Accepts any TREX/TREL/TRED data loggers.- Use LTI-WM-WiFi to upload data in real time without access to a computer and installed software.
- Accepts TREX/TREL/TRED data loggers.
- Easily set up to work with your WiFi network
- Downloaded data is fully encrypted and automatically uploaded to a secure server.
- Uploaded data is immediately available to authorized stakeholders.
- If the WiFi network is temporarily unavailable, downloaded data is stored in the LTI-WM- WiFi’s buffer memory.
- Robust and reliable contacts are good for thousands of insertions.
- Inbuilt indicators show data download and network access status.
- Technical specification
-
Product Model LTI-WM-WiFi Operating Temperature Range -25°C to +40°C Storage Temperature Range -40°C to +70°C USB Standard 2.0 Logger Buffer Up to 45 logger downloads can be buffered WiFi IEEE 802.11 b/g/n (2.4Ghz) WPA/WPA2 security Network Security WPA/WPA2-PSK Environmental IP50 (Rated for inside use only) Power Source 5V (computer or USB wall charger) Size 70mm(H) x 114mm(W) x 38mm(D) Weight 100g Case Material ABS Connection USB Micro Range (Clear line of sight) 40m Standard Accessories 2.0m USB Cable, USB Wall Charger (US, other models available upon request) Compliance and Certifications - Download
Protective Enclosure
Protective EnclosureThe LogTag® Protective Enclosure is specifically designed for LogTag®recorder products to allow use in harsh environments.The design of the enclosure minimises the effects of thermal lag caused by the additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change for a given environment.
The enclosure’s case is made from high impact polycarbonate plastic and is clear to allow viewing of the enclosed recorder’s LCD or indicators.
Conservatively rated at IP67 (equivalent to NEMA6).Supports LogTag® TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8 products.
| LogTag® Models Supported | Supports all non-External Probe products. |
| Storage temperature range | -40°C to +85°C (-40°F to +185°F) |
| Protection rating | IP67 (equivalent to NEMA6) for temperatures 1°C to +40°C (33°F to +104°F) |
| Case material | Clear Polycarbonate |
| Seal Material | Silicon rubber |
| Chemical resistance | In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures. |
| Size | 104mm (L- not including lug) x 76.5mm (W – including clips and hinge) x 13mm D |
| Weight | 41g |
| T90 thermal performance | With TRIX-8 in 1 m/s air: T90 = to 10 minutes. With TRID30-7x in 1 m/s air: T90 = to 17minutes |
- Overview
-
Protective Enclosure
Protective EnclosureThe LogTag® Protective Enclosure is specifically designed for LogTag®recorder products to allow use in harsh environments.The design of the enclosure minimises the effects of thermal lag caused by the additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change for a given environment.
The enclosure’s case is made from high impact polycarbonate plastic and is clear to allow viewing of the enclosed recorder’s LCD or indicators.
Conservatively rated at IP67 (equivalent to NEMA6).Supports LogTag® TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8 products.
- Technical specification
-
LogTag® Models Supported Supports all non-External Probe products. Storage temperature range -40°C to +85°C (-40°F to +185°F) Protection rating IP67 (equivalent to NEMA6) for temperatures 1°C to +40°C (33°F to +104°F) Case material Clear Polycarbonate Seal Material Silicon rubber Chemical resistance In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures. Size 104mm (L- not including lug) x 76.5mm (W – including clips and hinge) x 13mm D Weight 41g T90 thermal performance With TRIX-8 in 1 m/s air: T90 = to 10 minutes.
With TRID30-7x in 1 m/s air: T90 = to 17minutes - Download
Wall Mount Bracket
The LogTag® Wall Mount Bracket provides an easy and tidy solution to mounting a LogTag® on a wall, door or vertical surface while still allowing easy removal of the LogTag® for download etc.
Molded in polycarbonate plastic to allow use in a large range of environments.
The Wall Mount Bracket can be used inside coolstores, refrigerators, freezers, shipping containers and many other applications.
- Overview
-
Wall Mount Bracket
The LogTag® Wall Mount Bracket provides an easy and tidy solution to mounting a LogTag® on a wall, door or vertical surface while still allowing easy removal of the LogTag® for download etc.
Molded in polycarbonate plastic to allow use in a large range of environments.
The Wall Mount Bracket can be used inside coolstores, refrigerators, freezers, shipping containers and many other applications.
- Download
Glycol buffer
The LogTag® Glycol Buffer is used where vaccines need to be monitored during storage or transport. It mirrors the temperature environment inside a vaccine vial, creating realistic temperature tracking data, which allow you to monitor that vaccines are not exposed to excessively high or low temperatures.
The Glycol Buffer compliant with the CDC requirements for vaccine storage monitoring. It is used with LogTag® ST100K-15 or ST100K-30 sensors connected to any TRED30-16R or TREX-8 temperature logger.
Note: External Temperature Probe and Glycol not provided.
| Compatible Probes | ST100K-15/ST100K-30. |
| Operating temperature range | -10°C to +60°C (With glycol fill). |
| Storage temperature range | -20°C to +60°C (Not liquid filled). |
| Case material | HDPE vial / PP cap. |
| Volume | 35ml/70ml options available. |
| Size | 79(H) x 38(W) x 38(D) without sensor installed. |
| Weight | 14g without liquid or sensor. |
| Compliance | RoHs. |
- Overview
-
Glycol buffer
The LogTag® Glycol Buffer is used where vaccines need to be monitored during storage or transport. It mirrors the temperature environment inside a vaccine vial, creating realistic temperature tracking data, which allow you to monitor that vaccines are not exposed to excessively high or low temperatures.
The Glycol Buffer compliant with the CDC requirements for vaccine storage monitoring. It is used with LogTag® ST100K-15 or ST100K-30 sensors connected to any TRED30-16R or TREX-8 temperature logger.
Note: External Temperature Probe and Glycol not provided.
- Technical specification
-
Compatible Probes ST100K-15/ST100K-30. Operating temperature range -10°C to +60°C (With glycol fill). Storage temperature range -20°C to +60°C (Not liquid filled). Case material HDPE vial / PP cap. Volume 35ml/70ml options available. Size 79(H) x 38(W) x 38(D) without sensor installed. Weight 14g without liquid or sensor. Compliance RoHs.
ST100 External Probes
The ST100 probes are suitable for the LogTag® TREX and TRED30 models. All probes are terminated with a high quality gold plated MCX connector & industrial strength PTFE coaxial cable. All ST100 external probes are interchangeable whilst still maintaining published accuracy.
-
ST100J – 40mm tip length, ⌀3.2mm
-
ST100K – 65mm tip length, ⌀3.2mm
-
ST100L – 90mm tip length, ⌀3.2mm
-
ST100S – 30mm tip length, ⌀5mm
-
ST100T – 140mm tip length, ⌀5mm
-
ST100H – Handled with 105mm tip length, ⌀5mm
-
ST100B – Untipped (bare sensor).
| LogTag® Models Supported | Supports all non-External Probe products. |
| Storage temperature range | -40°C to +85°C (-40°F to +185°F) |
| Protection rating | IP67 (equivalent to NEMA6) for temperatures 1°C to +40°C (33°F to +104°F) |
| Case material | Clear Polycarbonate |
| Seal Material | Silicon rubber |
| Chemical resistance | In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures. |
| Size | 104mm (L- not including lug) x 76.5mm (W – including clips and hinge) x 13mm D |
| Weight | 41g |
| T90 thermal performance | With TRIX-8 in 1 m/s air: T90 = to 10 minutes. With TRID30-7x in 1 m/s air: T90 = to 17minutes |
- Overview
-
ST100 External Probes
The ST100 probes are suitable for the LogTag® TREX and TRED30 models. All probes are terminated with a high quality gold plated MCX connector & industrial strength PTFE coaxial cable. All ST100 external probes are interchangeable whilst still maintaining published accuracy.
-
ST100J – 40mm tip length, ⌀3.2mm
-
ST100K – 65mm tip length, ⌀3.2mm
-
ST100L – 90mm tip length, ⌀3.2mm
-
ST100S – 30mm tip length, ⌀5mm
-
ST100T – 140mm tip length, ⌀5mm
-
ST100H – Handled with 105mm tip length, ⌀5mm
-
ST100B – Untipped (bare sensor).
-
- Technical specification
-
LogTag® Models Supported Supports all non-External Probe products. Storage temperature range -40°C to +85°C (-40°F to +185°F) Protection rating IP67 (equivalent to NEMA6) for temperatures 1°C to +40°C (33°F to +104°F) Case material Clear Polycarbonate Seal Material Silicon rubber Chemical resistance In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures. Size 104mm (L- not including lug) x 76.5mm (W – including clips and hinge) x 13mm D Weight 41g T90 thermal performance With TRIX-8 in 1 m/s air: T90 = to 10 minutes.
With TRID30-7x in 1 m/s air: T90 = to 17minutes - Download
ST10 External Probe
The ST10 probe is suitable only for the LogTag® TREL-8 & TREL30-16 models. The probe is terminated with a high quality gold plated MCX connector & industrial strength PTFE coaxial cable.
ST10 – Suitable for TREL-8/TREL30-16
The tipped probe incorporates a 22mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief.
All materials at probe end of cable are FDA food rated including the cable.
Supplied standard (part# ST10S-05) with 0.5m (19”) or extended (part#ST10S-30) with 3m (9’10″) cable terminated to MCX plug for plugging into LogTag TREL.
- Overview
-
ST10 External Probe
The ST10 probe is suitable only for the LogTag® TREL-8 & TREL30-16 models. The probe is terminated with a high quality gold plated MCX connector & industrial strength PTFE coaxial cable.
ST10 – Suitable for TREL-8/TREL30-16
The tipped probe incorporates a 22mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief.
All materials at probe end of cable are FDA food rated including the cable.
Supplied standard (part# ST10S-05) with 0.5m (19”) or extended (part#ST10S-30) with 3m (9’10″) cable terminated to MCX plug for plugging into LogTag TREL.
STX-50 External Sensor Cable
The STX-50 external sensor extension cable is suitable for light industry applications. Cable Terminated to MCX Plug and probe tip can be fully immersed to end of stainless section.
5 meter (~16’ 5”) extension cable for extending ST10 or ST100 external temperature sensors.
The socket end of the cable (which accepts the ST100 or ST10 sensor plug) is fitted with a flexible sleeve that when the ST sensor’s plug is in place will protect the mated connection to IP61. The STX-50 extension is designed as a permanent connection and not for frequent connections.
Materials at external sensor end of cable is FDA Food Rated and 316 Stainless Steel.
- Overview
-
STX-50 External Sensor Cable
The STX-50 external sensor extension cable is suitable for light industry applications. Cable Terminated to MCX Plug and probe tip can be fully immersed to end of stainless section.
5 meter (~16’ 5”) extension cable for extending ST10 or ST100 external temperature sensors.
The socket end of the cable (which accepts the ST100 or ST10 sensor plug) is fitted with a flexible sleeve that when the ST sensor’s plug is in place will protect the mated connection to IP61. The STX-50 extension is designed as a permanent connection and not for frequent connections.
Materials at external sensor end of cable is FDA Food Rated and 316 Stainless Steel.
