EE220

Humidity and Temperature Transmitter with Interchangeable Probes

The innovative, modular EE220 humidity (RH) and temperature (T) transmitter consists of a basic unit and various pluggable, interchangeable probes.
The basic unit can accommodate one combined EE07 RH and T probe or two separate EE07 probes, one for RH and one for T.
The EE07 probes are available in plastic or in stainless steel enclosure and can be plugged onto the basic unit either directly or with M12 extension cables up to 10 m (32.8 ft) long. An optional kit facilitates the mounting of the probes in a duct.
The EE220 basic unit is available with polycarbonate or with metal enclosure, suitable for wall mount or for installation on rails (DIN EN 50022). For pharma and food industry the basic unit  features a rear cable inlet.
The measured values are available on two analogue voltage or current (2 wire 4 – 20 mA) outputs, as well as on the optional display.
One or two point adjustment for RH and T of the transmitter can be easily performed with push buttons on the electronics board of the EE220 basic unit. Alternatively, the EE07 probes can be adjusted individually with the EE-PCA Product Configuration Adapter (see EE07 data sheet).
For surface moisture monitoring or for the early detection of condensation danger, EE220 can accommodate the EE03 RH & T module (see data sheet EE03).

EE220

 

Humidity range 0…100% HR
Accuracy ±2% HR
Measurment range -40…80 °C
Incertitude ±0,1°C
Output 0-1/10 V ou 4-20 mA
Supply 24 V AC/DC
Overview

EE220

Humidity and Temperature Transmitter with Interchangeable Probes

The innovative, modular EE220 humidity (RH) and temperature (T) transmitter consists of a basic unit and various pluggable, interchangeable probes.
The basic unit can accommodate one combined EE07 RH and T probe or two separate EE07 probes, one for RH and one for T.
The EE07 probes are available in plastic or in stainless steel enclosure and can be plugged onto the basic unit either directly or with M12 extension cables up to 10 m (32.8 ft) long. An optional kit facilitates the mounting of the probes in a duct.
The EE220 basic unit is available with polycarbonate or with metal enclosure, suitable for wall mount or for installation on rails (DIN EN 50022). For pharma and food industry the basic unit  features a rear cable inlet.
The measured values are available on two analogue voltage or current (2 wire 4 – 20 mA) outputs, as well as on the optional display.
One or two point adjustment for RH and T of the transmitter can be easily performed with push buttons on the electronics board of the EE220 basic unit. Alternatively, the EE07 probes can be adjusted individually with the EE-PCA Product Configuration Adapter (see EE07 data sheet).
For surface moisture monitoring or for the early detection of condensation danger, EE220 can accommodate the EE03 RH & T module (see data sheet EE03).

Technical specifications

EE220

 

Humidity range 0…100% HR
Accuracy ±2% HR
Measurment range -40…80 °C
Incertitude ±0,1°C
Output 0-1/10 V ou 4-20 mA
Supply 24 V AC/DC
Downloads
Contact Quote request