Air Trace MK2
The Concept Smoke Air Trace MK2 and MK2 S (stainless option for cleanroom environment) are perfect for situation where small volumes of smoke is required for air tracing applications or in remote locations where no power is available. It is capable of producing a smooth stream of smoke for up to 15-20 minutes on a full battery.
An extension pipe 200mm x 15mm bore is included to allow precise placement of the smoke.
The units are very simple to operate and makes smoke on demand, with no warm up time.
Concept Smoke Air Trace – Hand held battery Smoke Machine
- 12v DC operation (battery operated)
- 1 second warm up time
- Switch mode charger (will charge from a 110v / 230v)
- Complete with quality carry case, battery, extension spout, charger & 500ml of Smoke Fluid
- Handheld, 100% portable, light weight & easy to use
- Ideal for tracing local airflows & flow visualisation
Applications
For looking to highlight airflow – Local Exhaust Ventilation – Air Flow Visualisation
Air Trace MK2
|
|
| Smoke Out
Hight Output Low Output |
2.8m3/minute 1.4m3/minute |
| Power Consumption | 65-75W |
| Tank capacity | 110ml |
| Fluid Consumption
Hight Output Low Output |
2ml per minute 1ml per minute |
| Battery | 12v / 2.3Ah |
| Dimensions | 227 x 66 x 81mm |
| Smoke Run Time (bettery life)
Hight Output Low Output Main adaptation kit |
10 – 12 minutes 15-20 minutes 60 minutes |
- Overview
-
Air Trace MK2
The Concept Smoke Air Trace MK2 and MK2 S (stainless option for cleanroom environment) are perfect for situation where small volumes of smoke is required for air tracing applications or in remote locations where no power is available. It is capable of producing a smooth stream of smoke for up to 15-20 minutes on a full battery.
An extension pipe 200mm x 15mm bore is included to allow precise placement of the smoke.
The units are very simple to operate and makes smoke on demand, with no warm up time.
Concept Smoke Air Trace – Hand held battery Smoke Machine
- 12v DC operation (battery operated)
- 1 second warm up time
- Switch mode charger (will charge from a 110v / 230v)
- Complete with quality carry case, battery, extension spout, charger & 500ml of Smoke Fluid
- Handheld, 100% portable, light weight & easy to use
- Ideal for tracing local airflows & flow visualisation
Applications
For looking to highlight airflow – Local Exhaust Ventilation – Air Flow Visualisation
- Technical Specifications
-
Air Trace MK2
Smoke Out Hight Output
Low Output
2.8m3/minute
1.4m3/minute
Power Consumption 65-75W Tank capacity 110ml Fluid Consumption Hight Output
Low Output
2ml per minute
1ml per minute
Battery 12v / 2.3Ah Dimensions 227 x 66 x 81mm Smoke Run Time (bettery life) Hight Output
Low Output
Main adaptation kit
10 – 12 minutes
15-20 minutes
60 minutes
- Downloads
