ATI 5D
The 5D Thermal Aerosol Generator is designed for operators who require a wide range of aerosol output concentrations to perform leak tests on smaller clean air cabinets through cleanroom air handling systems.
Save time and money in the most demanding multi-filter cleanroom installations. In high-volume HEPA and ULPA airflow environments, the 5D can significantly reduce the time it takes to conduct filter leak test scans, generating aerosol concentrations that can challenge the largest Air Handling Unit (AHU) configurations. With 1- to 2-minute warmup and cool-down times, begin testing high-flow systems without waiting, and be ready to store and move the unit minutes after the job is complete.
An innovative design minimizing system thermal requirements provides a faster, simpler, and safer alternative to other available solutions. The 5D is certified to comply with all applicable electrical and safety requirements, including CE and RoHS 2 standards.
The 5D Provides:
- High Aerosol Output
- Widest Range of System Flow Rates
- One Minute Warm-up Time
- Flex-Fuel Capability
- Rugged Portability
- Safe and Reliable Operation
Applications
Nuclear Facilities – Pharmaceutical Manufacturers – Medical Facilities and Cleanrooms – Independent Filter Certifiers
ATI 5D |
|
| Generation | Thermal Vapor |
| Warm-Up and Cool-Down Time |
1-2 minutes |
| System Flow Rates | 500 – 70,000 cfm (833-119,000 m3/hr.) |
| Aerosol Output at Max Concentration | 100ug/l @ 7,000 cfm 10ug/l @ 70,000 cfm |
| Particle Distribution | Meets ANSI/ASME N509/510 |
| Flex-Fuel Capability | DOP, PAO-4, DOS, Ondina, and Mineral Oil |
| Electrical | 10A @120VAC 60Hz; 5A @ 240 VAC/50Hz |
| Size | 17” x 5” x 15” (43cm x 12cm x 36cm) |
| Weight | 17.6 Lbs. (approximately 8 kg) empty |
| Standards | ISO14644-3, CE RoHS 2 (2011/65/EU directive) |
- Overview
-
ATI 5D
The 5D Thermal Aerosol Generator is designed for operators who require a wide range of aerosol output concentrations to perform leak tests on smaller clean air cabinets through cleanroom air handling systems.
Save time and money in the most demanding multi-filter cleanroom installations. In high-volume HEPA and ULPA airflow environments, the 5D can significantly reduce the time it takes to conduct filter leak test scans, generating aerosol concentrations that can challenge the largest Air Handling Unit (AHU) configurations. With 1- to 2-minute warmup and cool-down times, begin testing high-flow systems without waiting, and be ready to store and move the unit minutes after the job is complete.
An innovative design minimizing system thermal requirements provides a faster, simpler, and safer alternative to other available solutions. The 5D is certified to comply with all applicable electrical and safety requirements, including CE and RoHS 2 standards.
The 5D Provides:
- High Aerosol Output
- Widest Range of System Flow Rates
- One Minute Warm-up Time
- Flex-Fuel Capability
- Rugged Portability
- Safe and Reliable Operation
Applications
Nuclear Facilities – Pharmaceutical Manufacturers – Medical Facilities and Cleanrooms – Independent Filter Certifiers
- Technical Specifications
-
ATI 5D
Generation Thermal Vapor Warm-Up and
Cool-Down Time1-2 minutes System Flow Rates 500 – 70,000 cfm
(833-119,000 m3/hr.)Aerosol Output at Max Concentration 100ug/l @ 7,000 cfm
10ug/l @ 70,000 cfmParticle Distribution Meets ANSI/ASME N509/510 Flex-Fuel Capability DOP, PAO-4, DOS, Ondina, and Mineral Oil Electrical 10A @120VAC 60Hz; 5A @ 240 VAC/50Hz Size 17” x 5” x 15” (43cm x 12cm x 36cm) Weight 17.6 Lbs. (approximately 8 kg) empty Standards ISO14644-3, CE RoHS 2 (2011/65/EU directive) - Downloads
