EL-WEM+

The EL-WEM+ continually monitors Indoor Air Quality, with a coloured status ring to display the IAQ level at a glance. It also automatically uploads data to the EasyLog Cloud, allowing your complete set of data measurements to be viewed, analysed and downloaded from any internet-enabled device.
The IAQ level is rated in five levels from Excellent to Inadequate, and if it reaches either of the two lowest levels the status ring turns red. Using the EasyLog Cloud, you can set emails and SMS messages to notify you as soon as this happens.
You can also activate an audible alert sounder, and set a daily Do Not Disturb period if you wish.
The EL-WEM+ is simple to set up, with a single button press and the EasyLog Cloud App.
A power supply is included and the unit also has an internal back-up battery, allowing it to continue operating in low power mode if mains power is temporarily lost.

  • Records CO 2 and Indoor Air Quality (IAQ) with alarms
  • Measures:
    • CO 2
    • Temperature
    • Humidity
    • VOC’s
    • Particulate Matter
  • Pressure
  • Automatically uploads data to the EasyLog Cloud
  • Coloured status ring shows IAQ level
  • Audible and visual alert with email and SMS notifications available
  • Detects VOCs from paints, lacquers, paint strippers, cleaning products, furnishings, glues, adhesives and alcohol
  • Control multiple devices and view data anywhere with EasyLog Cloud and App
  • Power supply included
  • Internal back-up battery if power interrupted
 

EL WEM+

 

Measurement Range (CO2)
0 to 40 000 ppm
Accuracy (CO2)
±3 %
Measurement Range (T)
-20 to +60°C
Accuracy (T)
±0.6°C to 15°C
Measurement Range (RH)
0 to 95% RH
Accuracy (RH)
±3 %
Biogenic VOC Accuracy
±5%
Particulate Size Measured
PM10, PM2.5, PM1
Accuracy (PM)
0 to1000µg/m3
Measurement Range (mbar)
300 to 1100mbar
Accuracy (mbar)
±0,6 mbar
Dimensions (Height x Diameter)
170,5 × 77 mm
Overview

EL-WEM+

The EL-WEM+ continually monitors Indoor Air Quality, with a coloured status ring to display the IAQ level at a glance. It also automatically uploads data to the EasyLog Cloud, allowing your complete set of data measurements to be viewed, analysed and downloaded from any internet-enabled device.
The IAQ level is rated in five levels from Excellent to Inadequate, and if it reaches either of the two lowest levels the status ring turns red. Using the EasyLog Cloud, you can set emails and SMS messages to notify you as soon as this happens.
You can also activate an audible alert sounder, and set a daily Do Not Disturb period if you wish.
The EL-WEM+ is simple to set up, with a single button press and the EasyLog Cloud App.
A power supply is included and the unit also has an internal back-up battery, allowing it to continue operating in low power mode if mains power is temporarily lost.

  • Records CO 2 and Indoor Air Quality (IAQ) with alarms
  • Measures:
    • CO 2
    • Temperature
    • Humidity
    • VOC’s
    • Particulate Matter
  • Pressure
  • Automatically uploads data to the EasyLog Cloud
  • Coloured status ring shows IAQ level
  • Audible and visual alert with email and SMS notifications available
  • Detects VOCs from paints, lacquers, paint strippers, cleaning products, furnishings, glues, adhesives and alcohol
  • Control multiple devices and view data anywhere with EasyLog Cloud and App
  • Power supply included
  • Internal back-up battery if power interrupted
Technical specification
 

EL WEM+

 

Measurement Range (CO2)
0 to 40 000 ppm
Accuracy (CO2)
±3 %
Measurement Range (T)
-20 to +60°C
Accuracy (T)
±0.6°C to 15°C
Measurement Range (RH)
0 to 95% RH
Accuracy (RH)
±3 %
Biogenic VOC Accuracy
±5%
Particulate Size Measured
PM10, PM2.5, PM1
Accuracy (PM)
0 to1000µg/m3
Measurement Range (mbar)
300 to 1100mbar
Accuracy (mbar)
±0,6 mbar
Dimensions (Height x Diameter)
170,5 × 77 mm
Download
Contact Quote request